Hangarium
TR

A320 FAMILY · 23 SYSTEMS · TURKISH NARRATION

Learn aircraft systems while they run.

On Hangarium the schematics actually work. Switch off a pump: pressure drops, the PTU kicks in, and the indications and ECAM change at the same moment.

Create a free accountBrowse the trainings

The Hydraulic Power trainer is free with an account. Meanwhile, stop an engine with the buttons on the schematic; it runs the same model as the trainer.

Good to know: narration, lesson text and the rest of the site are in Turkish for now. Cockpit, ECAM and panel labels are in English, exactly as on the aircraft.

LIVE · ATA 29 HYDRAULIC · IN FLIGHT
GREEN3000PSIBLUE3000PSIYELLOW3000PSIEDP 1ELECEDP 2RATPTU

3/3 systems pressurized. All three systems hold 3000 PSI on their own pumps. The PTU is armed and idle: there is no pressure difference.

SYSTEMS
23
LESSON STEPS
1,626

01VOICE LESSONS

The lesson runs on the schematic.

Each system is taught chapter by chapter. The narrator highlights the part being discussed and puts the system into that state, so you see it working as you hear about it.

Voice lesson: schematic with the PTU highlighted, lesson text, progress bar and chapter picker
  1. The narrator highlights the part being discussed and dims the rest.
  2. Step forward, pause, or go back a step.
  3. Jump to any topic from the chapter list.
  4. The narration is also on screen, so you can follow with the sound off.

02FAILURES

Inject the failure, watch it spread.

Stop an engine, cut electrical power or fail a component. The schematic, panels and displays show together how the failure propagates through the system.

In scenarios you first predict what will happen, then apply the event and compare your prediction with how the system actually responds.

Engine 1 stopped: the green system is fed through the PTU, mode PTU TRANSFER
  1. Stop engine 1 from the failures menu.
  2. The green system’s engine-driven pump stops.
  3. The PTU starts and transfers power from yellow to green.
  4. The operating mode switches to PTU TRANSFER on its own.

03WHY

Computed, not drawn.

Every state you see is computed by the system model. You are not watching a canned animation; you see how the system responds to what you changed.

Cockpit, ECAM and panel labels stay in English, as on the aircraft. Start a lesson on a tablet in the hangar and finish it at home on your computer.

System status

CANNED ANIMATION
NONE
LABELS
AS ON THE AIRCRAFT
NARRATION
TURKISH · VOICE
DEVICES
TABLET · DESKTOP
PROGRESS
SAVED TO YOUR ACCOUNT
HYDRAULIC POWER
FREE WITH AN ACCOUNT

04CATALOG

Trainings

23 system trainers, organised by ATA chapter. Hydraulic Power is free with an account; the rest come with a subscription.

ATA 21ATA 22ATA 23ATA 24ATA 26ATA 27ATA 28ATA 29ATA 31ATA 32ATA 34ATA 36ATA 38ATA 49ATA 70

All trainings (in Turkish) →

Hydraulic Power is free. Everything else is one subscription.

All systems, voice lessons and fault scenarios: ₺2,499 a month or ₺19,499 a year, in Turkish lira with all taxes included.

Good to know: narration, lesson text and the rest of the site are in Turkish for now. Cockpit, ECAM and panel labels are in English, exactly as on the aircraft.

Create a free accountPricing (in Turkish)

Content is for training and familiarisation only; it does not replace approved maintenance documentation or authorised training. Hangarium is not affiliated with Airbus or any other manufacturer. Details (in Turkish): Terms of Use.